Skip to Content.
Sympa Menu

baslinux - Re: [BL] Connecting via ethernet

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Connecting via ethernet
  • Date: Fri, 14 May 2004 07:02:41 +1200

Sindi Keesan wrote:
>
> insmod 8390
> insmod ne 0x300 irq=10

I assume that is io=0x300 ?

> ifconfig eth0 192.168.1.1
>
> then route on both and both machines gave me two lines,
> one with eth0 and one with lo.
>
> I could not ping (or transfer files).

I am still suspicious of your parameters for the ne card.
If you are unable to ping, then the first place I would
look is that io=0x300 parameter. I am not talking about
your typo -- I suspect that 0x300 is not the actual io
address for that card.

Cheers,
Steven






Archive powered by MHonArc 2.6.24.

Top of Page