Skip to Content.
Sympa Menu

baslinux - Re: [BL] Connecting via ethernet

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Sindi Keesan <keesan AT iamjlamb.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Connecting via ethernet
  • Date: Wed, 12 May 2004 11:53:30 -0400 (EDT)

On Wed, 12 May 2004 3aoo-cvfd AT dea.spamcon.org wrote:

> Sindi Keesan wrote:
> >
> > Are all ne ISA cards io=0x300?
>
> No.
>
> > Is there some way to determine the address?
>
> net.i
>
> > I tried using net.i kernel but it got stuck at com90xx.c this time.
>
> Which version of net.i? I've found that the one in Slackware 3.2
> is best at diagnozing ne2000 cards.

I used the one that you included in BL2. I have the 3.2 CD.
The SW71 net.i kernel worked fine with my PCI cards.

Turns out 300 is the correct address but I also needed irq=10.
I found the diagnostic programs for both ISA modems online, which also
give me the IRQ. The 3com one will tell me if the modem is working. Is
there some way to determine that for the winbond 906, which does ifconfig
(give me the line with eth0 in it) but won't ping?

>
> Cheers,
> Steven
>





Archive powered by MHonArc 2.6.24.

Top of Page