Baslinux mailing list

[baslinux AT lists.ibiblio.org]

I tried googling about the netgear ma401ra and locking up, and I
turned up one post where someone had tried different IRQs. So I put
this in /etc/pcmcia/config;

exclude irq 1
exclude irq 2
exclude irq 3
exclude irq 4
exclude irq 5
exclude irq 6
exclude irq 8
exclude irq 9
exclude irq 10
exclude irq 11
exclude irq 12
exclude irq 13
exclude irq 14
exclude irq 15

I made sure in the BIOS that the parallel port is on IRQ 5 and the
soundcard on IRQ 9 in an attempt to force PCMCIA to be on IRQ 7. But
it didn't make any difference. It's detected but if I try to configure
it, it seems to either just lock up or crash.

ljones