Baslinux mailing list

[baslinux AT lists.ibiblio.org]

Ok, I gave DSL a try on the newer laptop (IBM T22). The card was
detected and seemed to work ok; I was able to configure it using sudo,
e.g. sudo ifconfig eth0 192.168.0.45 . I tried also copying the .o
modules for hermes, orinoco and orinoco_cs back from DSL to BL3 - I'm
guessing they are different versions as they appear to be a different
size. It *almost* worked, but not quite: the modules insmod'd ok, but
with just 1 error:

orinoco_cs: Card services release does not match!

I'm not sure which module would be for the card services, however. The
green light seemed to remain on (and no crashes) but I was unable to
configure the card.

ljones