Skip to Content.
Sympa Menu

baslinux - RE: [BL] BL3 Floppy Version, Crashes when HD is attached

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: "Jason Chall" <shaggychall AT yahoo.com>
  • To: <baslinux AT lists.ibiblio.org>
  • Subject: RE: [BL] BL3 Floppy Version, Crashes when HD is attached
  • Date: Tue, 15 Feb 2005 04:19:19 -0500

First of all, thanks for running the check Ken, much appreciated. To
everyone else sorry for a few dumb questions, I'm pretty new to linux. A
quick look at fstab after the ramdisk question confimed it was not hda, but
thanks for the answers anyways. I changed a jumper on the motherboard to
make the SSD the 4th disk instead of the 1st, but that didn't seem to help.
On a brighter note, I stumbled accross getting my hard drive to work. I was
testing with an old 420 MB HD which was also crashing BL. Then I disabled
the drive in BIOS but left it connected and then it worked! Seems wierd to
me, but I'm not arguing with success. Can anyone make sense of that? Anyways
with HD disabled in BIOS I managed to install BL3 and boot it. To boot off
HD I had to reenable it in the BIOS. Next I'll try the big HD and at this
point I just figure, to hell with the SSD, I don't really need it since I
can boot of HD.

-----Original Message-----
From: baslinux-bounces AT lists.ibiblio.org
[mailto:baslinux-bounces AT lists.ibiblio.org]On Behalf Of Ken Martwick
Sent: Monday, February 14, 2005 7:30 PM
To: baslinux AT lists.ibiblio.org
Subject: Re: [BL] BL3 Floppy Version, Crashes when HD is attached


I have an HP Pavilion PC with an 80 Gb HDD so I I tested BL2 on it.
The ramdisk version boots fine and recognizes the HDD but does not
report its size when booting. (c)fdisk shows it as an 80 Gb drive
and correctly reports that there is one vfat (FreeDOS) partition
and that there are three ext2 (Linux) partitions. BL2 has no
proble mounting a ~ 40 Gb partition and couls even execute a
statically-linked program tha was there.
Ken
artwick

On Mon, Feb 14, 2005 at 04:43:29PM -0500, Jason Chall wrote:
> Regarding how the SSD is accessed, according to the manual "The PCM-4862
> features an internal Flash/ROM disk drive. This drive emulates a floppy
disk
> drive by using solid-state memory
> chips". This does not seem to be true though since under DOS this drive
> shows up under fdisk, which floppies don't. And if it is acting as a
floppy
> it doesn't seem like DOS would be able to access any more than 1.4 MB but
it
> sees all 8 MB of the SSD. Under linux the SSD does not show up under
fdisk.
> I tried mounting the seconding floppy disk a variety of ways but this did
> not seem to work. Does BL even support FAT? Also is the ramdisk hda?
>
> -----Original Message-----
> From: baslinux-bounces AT lists.ibiblio.org
> [mailto:baslinux-bounces AT lists.ibiblio.org]On Behalf Of
> 3aoo-cvfd AT dea.spamcon.org
> Sent: Sunday, February 13, 2005 2:10 AM
> To: baslinux AT lists.ibiblio.org
> Subject: Re: [BL] BL3 Floppy Version, Crashes when HD is attached
>
>
> Jason Chall wrote:
> >
> > I am running the floppy disk version of BL3
> > Everything works fine with just the floppy drive attached
> > but when I attach the Hard Disk, BL crashes on boot
> > Note, hard drive is large, 80 GB, and BIOS only sees it
> > as 8 GB.
>
> BasicLinux is designed for old hardware, so it is not
> surprising that it is tripped up by something fairly
> new, like your HD.
>
> > anyone know if I'll be able to see the whole 80GB once
> > I get BL running?
>
> Maybe not. I suspect the 2.2.16 kernel is unprepared
> for HDs that large.
>
> > Also when I do boot without HD, BL does not seem to
> > recognize Solid State Disk though
>
> How does the Solid State Disk connect to the system?
> IDE? USB? PCMCIA? If it's IDE, BL3 should autodetect
> it (but you will need to mount it yourself). If it's
> PCMCIA, you will need to add a module and edit the PCMCIA
> config file. If it's USB, you are out of luck -- BL3 has
> no USB capability.
>
> Cheers,
> Steven
>
> ____________________________
> http://www.basiclinux.com.ru
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux
>
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux

_______________________________________________
BasLinux mailing list
BasLinux AT lists.ibiblio.org
http://lists.ibiblio.org/mailman/listinfo/baslinux





Archive powered by MHonArc 2.6.24.

Top of Page