Baslinux mailing list

[Day Brown <daybrown AT hypertech.net>]

Sindi Keesan wrote:
> 
> >     If you can get them to work in DOS, then use the same settings after 
> > the -
> > insmod sb   io=0x220 irq=5 dma=1(0)  etc, and you should have no problems.
> >
> 
> I have not opened the computer to see what the jumpers are set to on my
> SB16 Creative (not Vibra16).
> 
> I booted with bare.i and did insmod 6 times including the above line and
> got four error messages:
> 
> unresolved symbol:  attach_uart401
> The other three also involved uart401, probe, unload, etc.
> 
> Does this mean my irq or dma might be set wrong?
I spoze, but you mite try going into the cmos and turning off the serial
port support for coms 1-2,3-4. I've seen motherboard bugs that affected
the uarts of modems. You might also wanna use a dos tool to copy the
cmos onto both your IDE and FD before you go mucking around in the cmos.
 
> I will read the sound HOW-TO to see if there is some tool for determining
> how the jumpers are set.  There was something about isapnptools.