Skip to Content.
Sympa Menu

baslinux - Re: [BL] Sound in BL2

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Sindi Keesan <keesan AT iamjlamb.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Sound in BL2
  • Date: Sat, 24 Jan 2004 18:34:09 -0500 (EST)

> If you can get them to work in DOS, then use the same settings after
> the -
> insmod sb io=0x220 irq=5 dma=1(0) etc, and you should have no problems.
>



I have not opened the computer to see what the jumpers are set to on my
SB16 Creative (not Vibra16).

I booted with bare.i and did insmod 6 times including the above line and
got four error messages:

unresolved symbol: attach_uart401
The other three also involved uart401, probe, unload, etc.

Does this mean my irq or dma might be set wrong?

I will read the sound HOW-TO to see if there is some tool for determining
how the jumpers are set. There was something about isapnptools.





Archive powered by MHonArc 2.6.24.

Top of Page