Skip to Content.
Sympa Menu

baslinux - Re: [BL] Configure printcap etc. for an Epson Stylus

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Configure printcap etc. for an Epson Stylus
  • Date: Sun, 30 Jul 2006 10:21:45 +1200

Ron Clarke wrote:
>
> then it suddenly worked. (using netsetup with dhcp server set).
> I hope it still works next time. :)
>
> It didn't. :(

Can you ping the router?

> The ADSL modem/router is a NetComm NB5Plus4, which I am told is
> running a Windows system.

Can you edit the router config using a browser?

> Any hints would be gratefully received.

Step 1: activate NIC (check by looking for eth0 in dmesg)

Step 2: set address (check by doing ifconfig)

Step 3: check connection to router: ping [router address]

Step 4: set default gateway: route add default gw [router address]

Step 5: check default route: route

Cheers,
Steven





Archive powered by MHonArc 2.6.24.

Top of Page