Baslinux mailing list

[baslinux AT lists.ibiblio.org]

thanks Christof

> I do not know why the administrator password is not enough. Do you
> get into the BIOS setup, ie. before the system loads? If not you
> should try to find out which hot key to press at startup.

I do in case you do not have (or forgot the administrator password for
BIOS setup there are two possible solutions:

> - Some vendors have general passwords, which you can find on the web
>
> - Erase contents of the CMOS with a small program that you can find
> on the web too.

Thanks again Christof this can turn out to be very helpful information

/Mikkel