Skip to Content.
Sympa Menu

baslinux - Re: [BL] Bl3-32 will not boot

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Bl3-32 will not boot
  • Date: Sun, 28 Nov 2004 06:41:22 +1300

sindi keesan wrote:
>
> Have you noticed any other advantages to the
> newer kernel,

No, I only used it briefly. However, because it is
more up-to-date, it will probably work better on newer
hardware than the 2.2.16 kernel (but that doesn't matter
because BL3 is targeted at old PCs).

> or any drawbacks apart from its size?

None that I could see (although you do have to replace
the 2.2.16 modules with 2.4.18).

> Did you compile with the same configuration as for
> the standard BL3 kernel, or optimize for pentium?

I used the default BL3 config (although I might have
left out copro emulation -- can't remember).

Cheers,
Steven

____________________________
http://www.basiclinux.com.ru




Archive powered by MHonArc 2.6.24.

Top of Page