Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] Mower Troubles - Interlock

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: Mark A Abner <wizard1 AT kih.net>
  • To: Market Farming <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] Mower Troubles - Interlock
  • Date: Fri, 21 May 2004 09:42:11 -0400

Allan
well you can set a large rock on the seat to hold it down or hold the
switch closed with somehting like a clothspin or vice grips.The dreastic
solution would be to clip the wires off the plug strip the ends and twist
them together and eliminate the switch altogether.

Mark

Allan Balliett wrote:

> While I'm at it, how do I override the 'interlock relay' for testing
> purposes? This machine requires that someone is sitting on the seat
> in order to start the machine. There's a coupling just below the
> seat. When I unplug that coupling, the machine still will not start.
> Of course, I expect that I have other starter-related problems that
> keep the starter from turning with the key (works fine with 12v stuck
> right to it). I just want to make sure that this interlock is not
> what's keeping the starter from turning during testing. unplug?
> unplug and bridge the terminals? put my dog on the seat?
> Unfortunately, the key-start doesn't work with any of those in place.
> Just want to eliminate it as a problem.
>
> Thanks -Allan
> _______________________________________________
> Market-farming mailing list
> Market-farming AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/market-farming
>
> Get the list FAQ at: http://www.marketfarming.net/mflistfaq.htm






Archive powered by MHonArc 2.6.24.

Top of Page