Skip to Content.
Sympa Menu

baslinux - Re: [BL] Help for a newbie

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: sindi keesan <keesan AT sdf.lonestar.org>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Help for a newbie
  • Date: Thu, 4 Jan 2007 14:26:57 +0000 (UTC)

On Thu, 4 Jan 2007, Greg Mayman wrote:

On Wed, 3 Jan 2007 15:46:28 +0000 (UTC), sindi keesan wrote:

Does your printer have a power switch?

Yes, an electronic one. Every time the power is applied it turns itself
on and I have to use the pushbutton to turn it off. Most times I just
don't bother and I leave it on.

Does it work with BL?

I plug mine directly into the wall
and use the power switch, or use one of those strips that lets you power
on each device separately or power them all off at once.

I could really do with one of those strips with separate switching for
each outlet.

Last time, I made up an eight-way one with four dual outlets screwed to
a length of timber that I channeled out the back of for the wiring.

But I've used up all the outlets....
Hardware stores sell them.
Sindi


. ,-./\
. / \ from Greg Mayman, in Adelaide, South Australia
. \_,-*_/ "Queen City of The South" 34:55 S 138:36 E
. v


-----------------------
BasicLinux mailing list
-----------------------
http://www.basiclinux.com.ru
http://www.ibiblio.org/pub/linux/distributions/baslinux/
------------------------------------
To exit, send subject=unsubscribe to
baslinux-request AT lists.ibiblio.org


keesan AT sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org




Archive powered by MHonArc 2.6.24.

Top of Page