Baslinux mailing list

[sindi keesan <keesan AT sdf.lonestar.org>]

Thanks, that proves that this is a software not a hardware problem.  (It 
also gives you a way to use your hardware in BL with 2.4.31 kernel and 
modules).

Someone claims to have their Olympus camera working under 2.2.18 kernel. 
He said he needed basic scsi, scsi disk, and scsi generic (which would be 
sg).  Could 2.2.26 require sg.o if 2.4.31 does not?

On Fri, 10 Mar 2006, Sheldon Isaac wrote:

> I will reply more later.
>
> Sindi said, in part:
>
> > Please try it also with David's 2.4.31 kernel and modules, posted at
> > http://keesan.freeshell.org/bl/2.4.31 - bzImage.431.gz (gunzip it first)
> > and the modules are in userspec.tgz.431 - remove the '431', unpack it in
> > /tmp, and just copy over the modules: usbcore.o usb-ohci.o and usb-storage
> > to /lib/modules/2.4.31/misc (make that directory and subdirectory).
> SNIP
> > This kernel has built-in scsi, no need for scsi_mod and sd_mod.
> > Hit 'Enter' after you see a line about sda1 to get the prompt back.
>
> I did the above.
> And insmodded the 3 modules.
>
> Will type what I see on the "other" computer ( BL2.1) after I plugged in the
> reader with SD card:
>
> hub.c: new USB device 00:02,0-1, assigned address 2
>
> scsi0 : SCSI emulation for USB Mass Storage devices
>
>  Vendor: Generic  Model: STORAGE DEVICE Rev: 0100
>
>  Type:    Direct-Access                   ANSI SCSI revision: 02
>
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lin 0
>
> sda: Write Protect is off
>
> sda:  sda1
>  ==============
>
> It shows up when I say   fdisk /dev/sda
>
> And   mount -t msdos /dev/sda1 /mnt   works fine.
>
>
> Thanks,
> Sheldon
>
>
>
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux

keesan AT sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org