Baslinux mailing list

["Sheldon Isaac" <SheldonIsaac AT MyRealBox.com>]

Sorry, this will be long.

So far unable to use USB storage on computer "other" (late 1990s? ASUS P5A),
with HD-installed BL2.1 and the new 2.2.26 bzimage.big.

Have not yet tried with a fresh loop installed BL2.1
Or Steven's 2.2.26 BL3.40 kernel.
-------------

Module                  Size  Used by    Not tainted
usb-storage            21564   0 (unused)
usb-ohci               11840   0 (unused)
usbcore                44072   0 [usb-storage usb-ohci]
sd_mod                 16284   0 (unused)
scsi_mod               37812   2 [usb-storage sd_mod]
-------------

Linux version 2.2.26 (root AT zi2_2_26.p2) (gcc version egcs-2.91.66 
19990314/Linux (egcs-1.1.2 release)) #11 Mon Dec 5 13:40:40 NZDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 03efc000 @ 00100000 (usable)
Detected 300674 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 599.65 BogoMIPS
Memory: 62764k/65520k available (1324k kernel code, 416k reserved, 948k data, 
68k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: AMD-K6(tm) 3D processor stepping 00
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf0720
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 Detected PS/2 Mouse Port.
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
pty: 512 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DTTA-350640, ATA DISK drive
hdb: FUJITSU MPB3032ATU, ATA DISK drive
hdc: LITE-ON LTR-16102B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTTA-350640, 6197MB w/468kB Cache, CHS=790/255/63, UDMA
hdb: FUJITSU MPB3032ATU, 3093MB w/0kB Cache, CHS=785/128/63, UDMA
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 < hda5 > hda3 hda4
 hdb: hdb1 < hdb5 > hdb2 hdb3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.237 $ time 17:30:44 Nov 11 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Increasing latency timer of device 00:10 to 64
usb-ohci.c: USB OHCI at membase 0xc4020000, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB new device connect, assigned device number 2
usb.c: USB device 2 (vend/prod 0xcf2/0x6220) is not claimed by any active 
driver.
usb.c: registered new driver usb-storage
usb-storage.c: Searching unusual device list for (0xcf2, 0x6220, 0x100)...
usb-storage.c: -- did not find a matching device
usb-storage.c: USB Mass Storage device detected
usb-storage.c: Endpoints: In: 0xc3c4d364 Out: 0xc3c4d350 Int: 0x00000000 
(Period 0)
usb-storage.c: Result from usb_set_interface is 0
usb-storage.c: New GUID 0cf262200000606569746801
usb-storage.c: GetMaxLUN command result is 1, data is 0
usb-storage.c: Transport: Bulk
usb-storage.c: Protocol: Transparent SCSI
usb-storage.c: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
scsi : 1 host.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Command TEST_UNIT_READY (6 bytes)
usb-storage.c:   00 00 00 00 00 00 00 00 00 00
usb-storage.c: Bulk command S 0x43425355 T 0x1 LUN 0 L 256 F 0 CL 6
usb-storage.c: Bulk command transfer result=0
usb-storage.c: us_transfer_partial(): xfer 256 bytes
usb-storage.c: usb_stor_bulk_msg() returned -32 xferred 0/256
usb-storage.c: clearing endpoint halt for pipe 0xc0008200
usb-storage.c: us_transfer_partial(): unknown error
usb-storage.c: Bulk data transfer result 0x2
usb-storage.c: Attempting to get CSW...
usb-storage.c: Bulk status result = 0
usb-storage.c: Bulk status S 0x53425355 T 0x1 R 256 V 0x1
usb-storage.c: -- transport indicates command failure
usb-storage.c: Issuing auto-REQUEST_SENSE
usb-storage.c: Bulk command S 0x43425355 T 0x1 LUN 0 L 18 F 128 CL 6
usb-storage.c: Bulk command transfer result=0
usb-storage.c: us_transfer_partial(): xfer 18 bytes
usb-storage.c: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage.c: us_transfer_partial(): transfer complete
usb-storage.c: Bulk data transfer result 0x0
usb-storage.c: Attempting to get CSW...
usb-storage.c: Bulk status result = 0
usb-storage.c: Bulk status S 0x53425355 T 0x1 R 0 V 0x0
usb-storage.c: -- Result from auto-sense is 0
usb-storage.c: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage.c: scsi cmd done, result=0x1
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Command INQUIRY (6 bytes)
usb-storage.c:   12 00 00 00 ff 00 00 00 00 00
usb-storage.c: Bulk command S 0x43425355 T 0x2 LUN 0 L 256 F 128 CL 6
usb-storage.c: Bulk command transfer result=0
usb-storage.c: us_transfer_partial(): xfer 256 bytes
usb-storage.c: usb_stor_bulk_msg() returned 0 xferred 0/256
usb-storage.c: Bulk data transfer result 0x1
usb-storage.c: Attempting to get CSW...
usb-storage.c: Bulk status result = 0
usb-storage.c: Bulk status S 0x53425355 T 0x2 R 0 V 0x0
usb-storage.c: Fixing INQUIRY data, setting SCSI rev to 2
usb-storage.c: scsi cmd done, result=0x0
usb-storage.c: *** thread sleeping.
scsi: unknown type 31
  Vendor: yÇ -  Model: *'+í| -          Rev:  Ç&+
  Type:   Unknown                            ANSI SCSI revision: 07
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (1/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (2/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (3/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (4/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (5/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (6/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (7/0)
usb-storage.c: *** thread sleeping.
resize_dma_pool: unknown device type 31
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.