Baslinux mailing list

[baslinux AT lists.ibiblio.org]

Sind,
Thank you very much for all info.

>.....Specify io and irq when insmodding.

>In DSL terminal type lsmod for a list of modules in use.  How would one
>determine the io and irq from DSL?

Actually I do not know how to determine the io and irq parameters when
insmodding in BL....

Regards,
Giuseppe



----- Original Message -----
From: <baslinux AT lists.ibiblio.org>
To: <baslinux AT lists.ibiblio.org>
Sent: Tuesday, March 03, 2009 4:56 PM
Subject: Re: [BL] module for ethestreamer ibm in bl


>
> Sindi Keesan wrote
>
>
> > Salve,
> > I recently got for free an IBM desktop pentium 1 mmx 200 Mhz, 32 Mb Ram
> > (1996?).
> 1998 more likely.
>
> > It has an IBM ether Streamer 25H6106 card. I tried DSL live cd and it
> > detects as IBM etherjet isa-pnp but it does not connect.
> > Googling, I found the driver for win but not for linux.
>
> Searching on etherjet and linux: The card has a Crystal Semiconductor
> CS8900 or CS8920 chip, used in ISA cards and embedded applications because
> they are small and cheap.  Steven posted cs89x0.o for BL3.50 and Slackware
> 7.1 probably also has it for BL2.  Specify io and irq when insmodding.
>
> In DSL terminal type lsmod for a list of modules in use.  How would one
> determine the io and irq from DSL?
>
> If it does not connect, the card could be dead.  Ask your friends or a
> computer repair place for an old PCI ethernet card.
>
> > Can someone help me?
> > Thank you.
> > Regards,
> >
> > Giuseppe
> >
> >
> >
>
> -----------------------
> BasicLinux mailing list
> -----------------------
> http://www.basiclinux.com.ru
> http://www.ibiblio.org/pub/linux/distributions/baslinux/
> ------------------------------------
> To exit, send subject=unsubscribe to
> baslinux-request AT lists.ibiblio.org