Baslinux mailing list

[baslinux AT lists.ibiblio.org]

Message from Steven
===================
> > The tones of the beeps indicate success or failure 
> > of particular configuration steps.  Two high beeps 
> > indicate that a card was identified and configured 
> > successfully.  A high beep followed by a low beep 
> > indicates that a card was identified, but could 
> > not be configured for some reason.  One low beep 
> > indicates that a card could not be identified.
>    
> And no sound means nothing worked?

I'm not an expert on the inner workings of PCMCIA,
but I'm wondering if you might need the tcic module.
Apparently it is used instead of i82365 in some cases.

Cheers,
Steven