Baslinux mailing list

[baslinux AT lists.ibiblio.org]

Message from Steven
===================
>
> > When you execute /etc/pcmcia/start do you get
> > two beeping sounds?  
>
> No sound.

The tones of the beeps indicate success or failure 
of particular configuration steps.  Two high beeps 
indicate that a card was identified and configured 
successfully.  A high beep followed by a low beep 
indicates that a card was identified, but could 
not be configured for some reason.  One low beep 
indicates that a card could not be identified.

Cheers,
Steven