Skip to Content.
Sympa Menu

baslinux - Re: [BL] BL3 and SATA hard drives

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: "David Moberg" <davidjmoberg AT gmail.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] BL3 and SATA hard drives
  • Date: Wed, 12 Jul 2006 10:40:39 -0700

sindi keesan wrote:
On Wed, 12 Jul 2006 3aoo-cvfd AT dea.spamcon.org wrote:

> sindi keesan wrote:
>>
>> Can other people make device files in loop BL3.40?
>
> Yup, works for me. I just made /dev/hde2

I will try loop BL3.40 with your kernel instead of mine and do some more
experimenting. With my kernel, every time, I am able to write to the scsi
drives but not the loop file when booted with loop BL3.40.

Are you able to boot read-write SCSI loop on a different computer?
Perhaps it's a hardware loop compatibility problem. Is there some
reason why you cannot make an ext2 partition on the SCSI drive?

David




Archive powered by MHonArc 2.6.24.

Top of Page