Baslinux mailing list

["David Moberg" <davidjmoberg AT gmail.com>]

sindi keesan wrote:
> What is the correct value?

Steven suggested 0x330 from the "default values for SoundBlaster
hardware". On my card it was 0x300.

> Assuming you have an SB16 ISA card, how exactly did you
> insmod all the required modules?

(insmod sb.o dependencies)

insmod sb io=0x220 mpu_io=0x300 irq=9 dma=0

dma16 is unnecessary for midi so I left it out. (IRQ 5 was taken by my modem.)

> Did you need to use isapnp?

Yes, but only because I have a pnp card and boot from lilo. If you
have a jumpered card, the value depends on the jumper setup; but if
you use DOS to initialize the card, you should be able to find the
settings in the DOS initializing tool.

> When I playmidi -e it plays to awe32, same as with playmidi -a.

What version of playmidi? BL2?

David