Skip to Content.
Sympa Menu

baslinux - Re: [BL] Connecting via ethernet

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Connecting via ethernet
  • Date: Sat, 15 May 2004 08:26:11 +1200

Sindi Keesan wrote:
>
> One of the four is not working.
> insmod rtl8139 - 'device or resource busy'.
> I did this three times, powering off each time.
> Is this card dead?

Does a recent net.i find anything? If not, biff it.

> The Kingston ISA card tells me 'No NE*000 card found at
> i/o=0x120 when I do insmod ne io=0x300 irq=10

As I said before, the irq is not necessary (in fact it will
mess things up if you use the right address but the wrong IRQ).

> also for 0x280 320 340 360.

Yes, those are the most likely io addresses (but not all).
Try them without the IRQ parameter.

Cheers,
Steven




Archive powered by MHonArc 2.6.24.

Top of Page