Skip to Content.
Sympa Menu

baslinux - Re: [BL] modem problem

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Sindi Keesan <keesan AT iamjlamb.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] modem problem
  • Date: Fri, 30 Apr 2004 11:09:56 -0400 (EDT)

On Fri, 30 Apr 2004, Matrix Mole wrote:

> On Thu, 29 Apr 2004, Sindi Keesan wrote:
>
> > I dial and see 'registered device ppp0' and wait a while.
> > I Ctrl-C and dial again and immediately get noises and it dials and says
> > Serial connection established. Nothing about registered device this time.
> > Other suggestions? My workaround is tolerable.
>
> Take a look in the script that's doing the dialing and see exactly what is
> happening at all stages of the run (if it's not too much data, drop a copy
> of the scripts into emails to the list, or myself personally so I can look
> them over). There's got to be some line in there that is "fixing" the
> modem on the cancelation that's allowing it to dial the second time.
>
> I'm surprised the echo atz didn't work. Does the modem work properly if
> you use kermit, then try to dial the ISP? If so, that would indicate that
> kermit initialized it properly for the ISP dial. If not, then it's
> possible that something in the early part of the ISP dial is
> un-initializing the modem somehow.

After dialing with kermit I still cannot dial on the first try with eznet.
What script is doing the dialing? All I can find is the eznet executable
'eznet', which is binary. It came with the basiclinuxes so you probably
have it. I am using BL2. pppd is also binary.

>
>





Archive powered by MHonArc 2.6.24.

Top of Page