Baslinux mailing list

[Jean-Philippe Piers <f5nlg AT tiscali.fr>]

Hi,
all on sons-2.tgz are mpg123 , camp ( ansi front end to mpg123 playee ) 
aumix, aumix miniaml you should have sound. this package is not realy 
discribe but it is simple to use, just play around binary in the package camp 
is realy a nice console mp3 player. there is also Gphone who need some 
aditional gtk library and X but it's a nice "telephone" voice over IP

as Steven said you have to load the correct module for you'r sound card and 
make a try with some wav file.

cat toto.wav >/dev/dsp should product sound ! but you need a fast CPU and ram 
to play mp3 ... it doesn't work on 486 dx33 with 8mb ram .
you need more power and ram for mp3's

cheers

On Mon, 19 May 2003 19:53:57 +0000
qwms-avib AT dea.spamcon.org wrote:

> Ron Clarke wrote:
> > 
> > Has anyone got BL2 toplay music, and if so, what will I need.
> > I already have the bare-1 kernel, and I did try to install 
> > JP's sons.tgz, but it didn't seem to connect to anything.  
> > Did I miss something ?
> 
> I don't have a sound card on this system, so I'm not
> speaking from experience.  However, I think you need
> to install the sound module to give the bare.i kernel
> sound ability.  You will find it in Slackware 7.1 in:
> --------------------
> /modules/2.2.16/misc
> --------------------
> In BL2, put the module in /lib/modules/2.2.16/misc
> Then do the following:
> -------------------------
> insmod sound trace_init=1
> -------------------------
> The trace parameter should give you some output to show
> that your sound card is detected.  Then, perhaps, JP's
> program will work.
> 
> Cheers,
> Steven
> 
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux