baslinux AT lists.ibiblio.org
Subject: Baslinux mailing list
List archive
Re: [BL] Configure printcap etc. for an Epson Stylus
- From: Ron Clarke <ariadne AT earthlink.com.au>
- To: baslinux AT lists.ibiblio.org
- Subject: Re: [BL] Configure printcap etc. for an Epson Stylus
- Date: Sun, 30 Jul 2006 16:00:02 +1000
Hi Folks,
On Sat, 29 Jul 2006 22:41:17 +0000 (UTC)
sindi keesan <keesan AT sdf.lonestar.org> wrote:
> On Sun, 30 Jul 2006, Ron Clarke wrote:
>
> > I am pleased to say that I have installed a new (second-hand) printer
> > for DOS and Linux.
> > It is an HP Laserjet 5N, monochrome. I downloaded to DOS software that
> > goes with it, and I was also able to print from BL2 by editing
> > deskjet.filter to make sDEVICE=ljetplus and everything else the same.
>
> I have never seen that model. I have 6L and 1100. I think they will work
> as plain ljet or ljet4 without the plus. Try several different drivers
> because sometimes one works faster. (Avoid color drivers, they work but
> slowly).
I might try those drivers, but not the colour ones - it is a monochrome
printer. I will go with the "best" driver - this laserjet has a heap of
built-in fonts that I would like to have access to.
> >> How do you make pdf files in DOS?
> >
> > From HTM files, using Arachne -> xxxx.ps output file, then using
> > Ghostscript 7.x for DOS, or by quickly booting BL2 and using phoenix ->
> > nnn.ps, then ps2pdf.
>
> I did not know Arachne could do this, thanks.
You can set Arachne to output postcript to a file.
> I have a DOS version of Ghostscript 8.30. I can ask permission for you to
> use it.
I have the most up-to-date Ghostscript for DOS, it comes as a plug-in (APM
file) for Arachne.
> >> Beware of used laser paper feeders and jams unless you are very handy.
>
> > This one has been completely reconditioned and has a new paper-feeder
> > installed a few months ago.
>
> It is probably worth whatever that cost to avoid the problem. The
> new parts are reformulated and should last much longer.
It is being offered to me for Aus$ 250.00, about US $188.
Regards,
Ron
--
Ron Clarke
AUSREG Consultancy http://www.ausreg.com
Tadpole Tunes http://www.tadpoletunes.com
This mail sent to you from sylpheed running on penguin-power
-
Re: [BL] ADSL stuff-up (was ADSL setup)
, (continued)
- Re: [BL] ADSL stuff-up (was ADSL setup), Ron Clarke, 07/30/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), 3aoo-cvfd, 07/30/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), Ron Clarke, 07/31/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), 3aoo-cvfd, 07/31/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), Ron Clarke, 07/31/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), Ron Clarke, 07/31/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), 3aoo-cvfd, 07/31/2006
- Re: [BL] ADSL stuff-up (was ADSL setup), Ron Clarke, 07/31/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, sindi keesan, 07/29/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, 3aoo-cvfd, 07/29/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, Ron Clarke, 07/30/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, 3aoo-cvfd, 07/30/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, Ron Clarke, 07/30/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, sindi keesan, 07/30/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, Ron Clarke, 07/30/2006
- Re: [BL] Configure printcap etc. for an Epson Stylus, sindi keesan, 07/30/2006
Archive powered by MHonArc 2.6.24.