Skip to Content.
Sympa Menu

baslinux - Re: [BL] WP8 on Slack 4.0 install report

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] WP8 on Slack 4.0 install report
  • Date: Fri, 3 Dec 2004 21:01:25 +1300

James Miller wrote:
>
> Installing the WP8 I have on Slack 4.0 was a total breeze.

That's good news. Hopefully we'll be able to find a
way to get the same thing on BL3.

> I did an ldd on the binary
> ------------------------------------------------------
> libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x4004d000)
> libm.so.5 => /lib/libm.so.5 (0x400fc000)
> libc.so.5 => /lib/libc.so.5 (0x40105000)

Those are in BL3.

> libXpm.so.4 => /usr/X11R6/lib/libXpm.so.4 (0x400ed000)
> libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x401c5000)
> libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x401ce000)

Those are installed when you pkg icewm.tgz

> libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0x4000b000)

That one's missing.

> Suggestions based on the above for a possible BL3
> install

Save a copy of libXt from Slackware 4.0. Then:
(1) install BL3 to HD
(2) put libXt in /usr/X11R6/lib
(3) install the icewm package
(4) run the wp8 installation routine
(5) figure out which busybox binaries are failing
(6) install the full versions of those binaries

Good luck!

Cheers,
Steven

___________________________
http://www.basiclinux.com.ru




Archive powered by MHonArc 2.6.24.

Top of Page