Skip to Content.
Sympa Menu

baslinux - Re: [BL] cd install

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: "Owen Jones" <owen AT cellarmation.f2s.com>
  • To: <baslinux AT lists.ibiblio.org>
  • Subject: Re: [BL] cd install
  • Date: Sat, 3 Jul 2004 11:17:30 +0100

Not good, i have burnt the files to the cd, and they work. but i put fs.img
on the hard drive, by putting it on a windows machine and formating it
(fat32) and putting the file on. When i am in dos an i DIR it, dos says it
is empty :( the drive is detected, but acts as if it is completly empty! any
ideas of what i should do??

owen
----- Original Message -----
From: "Owen Jones" <owen AT cellarmation.f2s.com>
To: <baslinux AT lists.ibiblio.org>
Sent: Saturday, July 03, 2004 9:49 AM
Subject: Re: [BL] cd install


> Thanks, Sorry just another question. The fs.img file is as a file, or is
it
> decomperesed? is that what the loadlin is for? Will the cd boot itself or
do
> i need to run loadlin manualy?
> thank you!
>
> owen
> ----- Original Message -----
> From: <3aoo-cvfd AT dea.spamcon.org>
> To: <baslinux AT lists.ibiblio.org>
> Sent: Friday, July 02, 2004 11:45 PM
> Subject: Re: [BL] cd install
>
>
> > Owen Jones wrote:
> > >
> > > so i would put : fs.img on the computer hd (fat32 dos format)
> > > in baslin directory
> >
> > Yes, as long as it is in a primary partition (eg C:) not
> > in an extended partition. It can even be on a second/third
> > HD as long as it is on the first (primary) partition.
> >
> > > and put loadlin and intifs.gz on a cd?
> >
> > And boot.bat and zimage.
> >
> > Cheers,
> > Steven
> > _______________________________________________
> > BasLinux mailing list
> > BasLinux AT lists.ibiblio.org
> > http://lists.ibiblio.org/mailman/listinfo/baslinux
> >
>
>
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux
>






Archive powered by MHonArc 2.6.24.

Top of Page