Baslinux mailing list

[Sindi Keesan <keesan AT iamjlamb.com>]

On Sun, 16 May 2004, Alejandro Lieber wrote:

> With the MD220 Cirrus K56flex(X2) modem I use the following line:
> 
> AT+MS=V34B,0,28800,33600,28800,33600
> 
> that means:
> 
> +MS specifies the allowable conection modulation and data rate.
> 
> V34B: do not try to connect as K56flex(X2), try V34B instead.
> 
> 0 or 1: automode enable

What does this mean?

> 
> The following 4 numbers are min and max data allowed speed for 
> receiving and tranmiting.
> 

Why do you have four numbers instead of two for min and max?

So I could try:
AT+MS=v90,0,33600,57600  [do I need to repeat these two?] or is it
AT+MS=v90,0,33600,44400,45200,57600     [or two other numbers in the 
middle, which someone else suggested - 48800?]

This would probably speed things up a lot since my modem lists v34b, v42, 
X2 and V90 as options and it probably tries them all, which takes time.

> 
> 
> Read net news (USENET) with Arachne: http://www.lieber.com.ar/nnews.zip
> Sans Serif fonts for MS-DOS at: http://www.lieber.com.ar/novafont.zip
> Configurable dialing menu for several DOS internet programs at:
> http://www.lieber.com.ar/dial_ip.zip
> 
> ---------------------
> Ing. Alejandro Lieber  
> Rosario     Argentina
> ---------------------
> 
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux
>