Baslinux mailing list

["HenRi KiRya" <henry AT cmf.co.ug>]

pse rename the file to remove the etension

eg if file is redhat.exe, rename to redhat
the i shall rename it back here, thanks

-----Original Message-----
From: James Miller <jamtat AT mailsnare.net>
To: baslinux AT lists.ibiblio.org <baslinux AT lists.ibiblio.org>
Date: Friday, September 26, 2003 7:54 PM
Subject: Re: [BL] PCMCIA network and modem ERROR messages


>On Fri, 26 Sep 2003, HenRi KiRya wrote:
>
>> you could send me the attachements for the redhat kernels, will give
those a
>> try too
>> thanks
>>
>Any message I try to send you is getting blocked by a filtering rule,
>HenRi (yours? your ISP's?).  If you want me to send this kernel (ca. 650
>KB), you'll need to fix that and let me know when it's possible to send.
>
>James
>
>> the actual error message for the rtl is as follows;
>>
>> init_module: rtl8139 device or resource busy
>>
>>
>> -----Original Message-----
>> From: James Miller <jamtat AT mailsnare.net>
>> To: baslinux AT lists.ibiblio.org <baslinux AT lists.ibiblio.org>
>> Date: Friday, September 26, 2003 6:40 PM
>> Subject: Re: [BL] PCMCIA network and modem ERROR messages
>>
>>
>> >On Fri, 26 Sep 2003, HenRi KiRya wrote:
>> >>
>> >> i have found some driver modules for the card (fethcb_c.o)
>> >> one was written for the 2.2.14-5.0  kernel ( redhat 6.2)
>> >> the other for 2.2.16-22 ( redhat 7.0)
>> >>
>> >> i still get kernel version mismatch errors
>> >>  when i insmod fethcb_c.o  -f
>> >> unresolved symbol register drive
>> >>
>> >> is it possible to find where could i fing the above mentioned kernels
in
>> a
>> >> format tht is useable in
>> >> baslinux ?
>> >> i tried to find one from the redhat site and it was in the .rpm format
>> >>
>> >I have a hard disk laying around where I believe I still have RH 6.2
>> >installed with the stock kernel.  I could take a look and perhaps email
it
>> >to you as an attachment, if that would help.  Not sure about where you
>> >could find it, or the RH 7.0 kernel on the 'net, though.
>> >
>> >> and Steven ive tried to insmod the rtl8139.o from slackware 7.1
>> >> win no success
>> >>
>> >Could you say more about what "no success" means?  Do you get some error
>> >message when you try to insmod this module?  If so, what is it?  What
are
>> >any other symptoms that lead you to conclude that you've had "no
success"
>> >insmod'ing the rtl8139.o module?
>> >
>> >James
>> >_______________________________________________
>> >BasLinux mailing list
>> >BasLinux AT lists.ibiblio.org
>> >http://lists.ibiblio.org/mailman/listinfo/baslinux
>>
>>
>> _______________________________________________
>> BasLinux mailing list
>> BasLinux AT lists.ibiblio.org
>> http://lists.ibiblio.org/mailman/listinfo/baslinux
>_______________________________________________
>BasLinux mailing list
>BasLinux AT lists.ibiblio.org
>http://lists.ibiblio.org/mailman/listinfo/baslinux