Skip to Content.
Sympa Menu

baslinux - Re: [BL] PCMCIA support was BL3 Options Specific for Old Toshiba Laptop

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: sindi keesan <keesan AT sdf.lonestar.org>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] PCMCIA support was BL3 Options Specific for Old Toshiba Laptop
  • Date: Sat, 18 Mar 2006 22:55:08 +0000 (UTC)

With my new kernel I can run /etc/pcmcia/config with no error messages.
But I still don't know how to use a Cardbus ethernet card.

Insmod cardbus.o - unresolved symbol: find_io_region, undo_irq, try_irq, find-mem_region

Insmod 3c575_cb: unresolved symbol: unregister_driver, register_driver

Did I configure the kernel wrongly again?

I first edited /etc/pcmcia/config, changing pcnet_cs to 3c575_cb and removing the misc/8390 (not needed for 3com cards, I hope), so this module is now used for a network card.

Cardmgr -o just says it is an unsupported card. I don't get any info on it but I know it uses this module (or 3c59x using the 'hotplug' method).

Sindi

keesan AT sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org




Archive powered by MHonArc 2.6.24.

Top of Page