Skip to Content.
Sympa Menu

market-farming - Re: [Market-farming] Mulch layers and Bed Shapers?

market-farming AT lists.ibiblio.org

Subject: Market Farming

List archive

Chronological Thread  
  • From: "David Inglis" <mhcsa AT verizon.net>
  • To: "'Market Farming'" <market-farming AT lists.ibiblio.org>
  • Subject: Re: [Market-farming] Mulch layers and Bed Shapers?
  • Date: Wed, 05 Mar 2008 13:39:13 -0500



> From: Jason Jones [mailto:market-farming-bounces AT lists.ibiblio.org] On
Behalf Of
> Jason Jones
> Sent: Tuesday, March 04, 2008 4:49 PM
> To: Market Farming
> Subject: RE: [Market-farming] Mulch layers and Bed Shapers?
> Anyone have
> suggestions for alternatives to the Yoemans plow for bed shaping.

Jason,
I am not sure I understand. Do you mean adaptations to the Yeoman plow or
alternatives as you said, in which case, did I miss a discussion on Yeoman
plows?
I have a Yeoman Plow but don't use it for raising beds because of my soil
type but I have seen a very good adaptation developed by Eric Ardapple
[spl?] that raised some heavy Arkansas soils. Willies photo of his bed top
roller is like a very small version of what Eric did with his Yeoman plow.
There are a good number of bedformer designs around.
Here are a couple:
http://www.marketfarm.com/cfms/bed_shapers.cfm
http://www.samd.com.au/single_bedformer.html
'best.
Dave Inglis
Mahaiwe Harvest CSA
MA,USA







Archive powered by MHonArc 2.6.24.

Top of Page