Skip to Content.
Sympa Menu

baslinux - Re: [BL] BL on Toshiba T4800CT

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] BL on Toshiba T4800CT
  • Date: Wed, 11 Jun 2008 09:34:46 -0700 (PDT)

Hi Steven,


--- baslinux AT lists.ibiblio.org wrote:

> Message from Steven
> ===================
> monz wrote:
>
> > The port broken off is the one on the right side,
> > so i guess it's the PS/2.
>
> Are you sure you have a broken port? The trackball
> connector is on the right side (toward the front)
> and without the trackball, it looks a bit like a
> broken port.

A white plastic surface with 5 gold ovals on it?

> Further back (on the right side) is
> a little flap. Lift it up and you should find
> two PS/2 ports.

Hmm ... directly behind what must be the trackball
port is a pcmcia port, which has an old modem
card plugged in (but without the dongle on the end).
Behind that, at the rear of the right side, is
an empty hole which also has a pcmcia connector
at the back, but it's double-card height, with
only one connector at the bottom. Did the PS/2
port plug in there?

I have a Kingston Datapak 340 (MB) hard-drive
on a pcmcia card. I tried plugging it in to
that port, and BL did see it there. Unfortunately
i don't have a driver for it, so i couldn't
mount it. Any drivers available for that which
will work in BL?


-monz











Archive powered by MHonArc 2.6.24.

Top of Page