Baslinux mailing list

[3aoo-cvfd AT dea.spamcon.org]

Otto Werner wrote:
>
> > (1) Boot HD using DOS loadlin
> > (2) Edit /etc/lilo.conf
> > (3) Execute:  lilo -v
> > (4) Reboot (with lilo)
> 
> thats what i did. lilo.config with read-only or 
> read-write has the same result. 

It's not lilo.config, it's lilo.conf.  
The most likely cause of your problem is lilo booting 
read-only.  You need to tell lilo to boot read-write.  
If your problem continues, that means lilo is still 
booting read-only (i.e. you have not correctly told
lilo to boot read-write).

Cheers,
Steven






____________________________
http://www.basiclinux.com.ru