Baslinux mailing list

[3aoo-cvfd AT dea.spamcon.org]

Nomdo Jansonius wrote:
>
> I connected DOS to ADSL. This is really quite simple: 
> 
>   1. Download the correct driver for the network card from 
>      http://www.crynwr.com/drivers
>   2. Install the driver, e.g. for a driver called foo.com:
>        foo 0x60
>   3. Configure Arachne by choosing: manual TCP/IP setup => resident 
>      packet driver => configure via BOOTP
> 
> That's all! 
> 
> Now time for Linux. 
 
1.  Get the appropriate network module from Slackware 7.1
    (if it is not already in BL3).
2.  insmod the module
3.  execute:  dhcp

> can BL connect to a BOOTP/DHCP server? 

Yes, that's what dhcp does (in BL2).  
In BL3, it's udhcpc

Cheers,
Steven

____________________________
http://www.basiclinux.com.ru