baslinux AT lists.ibiblio.org
Subject: Baslinux mailing list
List archive
- From: baslinux AT lists.ibiblio.org
- To: baslinux AT lists.ibiblio.org
- Subject: Re: [BL] NTP on BL3
- Date: Sun, 1 Jul 2007 21:35:53 -0500
Hi again list,
Using nist.pl (from Sourceforge) works. Rdate and NTP (and openNTP)
would not compile, and getdate (small C prog) abd ez-ntp did not work
well either. Just FYI :)
Kudos on BL3 BTW - I'm on a Toshiba lappy with a 486 and 20 megs of
RAM and it seems damn near fast!
On 7/1/07, Chris Mohler <cr33dog AT gmail.com> wrote:
Hi list,
I've been toying around with BL3.50 on an ancient Toshiba laptop. I
wonder if there is a way to set the time via NTP - the battery is long
since dead on this lappy.
Thanks,
Chris
PS - I'm in lynx now, so sorry if the formatting of this message is a
bit screwy.
-
[BL] NTP on BL3,
baslinux, 07/01/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/01/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
- Re: [BL] NTP on BL3, baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
- Re: [BL] NTP on BL3, baslinux, 07/02/2007
- Re: [BL] NTP on BL3, baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/02/2007
- Re: [BL] NTP on BL3, baslinux, 07/02/2007
-
Re: [BL] NTP on BL3,
baslinux, 07/01/2007
Archive powered by MHonArc 2.6.24.