Skip to Content.
Sympa Menu

baslinux - Re: [BL] ethernet cards

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: "Ron Clarke" <ariadne AT ausreg.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] ethernet cards
  • Date: Mon, 29 Jan 2007 15:39:52 +1000

Hi Steven,

On Mon, 29 Jan 2007 17:16:45 +1300, 3aoo-cvfd AT dea.spamcon.org wrote:

> Ron Clarke wrote:

>> I am still trying to find out what module(s) I can use to
>> get either BL3 or BL2 to fire up the unknown ethernet on
>> the motherboard of my new machine. It is a Gigabyte GA-K8NF-9
>> with a nForce4-4X chipset. Newer distros (SW 10, Knoppix 5,
>> Suse 10, Ubuntu) all take it in their stride

> Does lsmod not tell which module they are using for
> the NIC?

No. It just deals with snd and usb.

> And what about dmesg? Doesn't it show the
> NIC type just before the eth0 line?

I tried with SW10.2.

dmesg [enter] just gives me a lot of almost identical groups of lines
relating to hotplug.

There is no eth0 line in /var/log/dmesg.

However, in /var/log/messages I came across pairs of dated lines:

darkstar kernel: eth0: forthdeth.c: subsystem: 01458:e000 bound
non-relevant lines
-
-
darkstar logger: /etc/rc.d/rc.inet1: /sbin/ifconfig eth0 down


Does this mean the the driver I would want is forthdeth.c ?

I don't fancy my chances for BL3. :(

Regards,
Ron




Ron Clarke
AUSREG Consultancy http://www.ausreg.com
Tadpole Tunes http://www.tadpoletunes.com
-- This mail was written by a user of the Arachne Browser - http://arachne.cz/




Archive powered by MHonArc 2.6.24.

Top of Page