Skip to Content.
Sympa Menu

baslinux - Re: [BL] scsi pcmcia in BL3.40 - module missing?

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Ron Clarke <ariadne AT earthlink.com.au>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] scsi pcmcia in BL3.40 - module missing?
  • Date: Wed, 31 May 2006 08:17:47 +1000

Hi Folks,

On Tue, 30 May 2006 15:49:03 +0000 (UTC)
sindi keesan <keesan AT sdf.lonestar.org> wrote:

> Do you have any idea why the 700MHz PIII won't work with BL2 and older
> kernel but it will with BL3 (your kernel 2.2.26, and mine for 2.2.16 and
> 2.4.31 - the first two are 'FATAL: kernel too old' for BL2).
>
> I used the exact same kernels for BL3 and BL2 2.2.16 and 2.2.26 - what
> else is different that would make BL3 work with the older kernels where
> BL2 says they are too old? Has anyone else tried BL2 on a PIII?

I use BL2.1 (with lots of add-ons from SW7.1) on an AMD K6 600 MHz with
256 MB RAM, everyday - it is my system for internet and email. I have never
had any problems with the kernel being "to old".

Regards,
Ron

--
Ron Clarke
AUSREG Consultancy http://www.ausreg.com
Tadpole Tunes http://www.tadpoletunes.com
This mail sent to you from sylpheed running on penguin-power




Archive powered by MHonArc 2.6.24.

Top of Page