Skip to Content.
Sympa Menu

baslinux - Re: [BL] New kernel for BL3

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: sindi keesan <keesan AT sdf.lonestar.org>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] New kernel for BL3
  • Date: Fri, 11 Nov 2005 17:58:49 +0000 (UTC)

On Fri, 11 Nov 2005, David Moberg wrote:

On Friday 11 November 2005 13:50, 3aoo-cvfd AT dea.spamcon.org wrote:
I've just uploaded a 2.2.26 kernel for BL3. It should work
on everything (386 up). It's slightly larger than the default
2.2.16 zimage (but it does sound).

Very nice. I was just thinking about building something like this.

I've also uploaded a set of 2.2.26 modules. You'll be able to
download just the modules you need (not the entire set).

One question: where is the usb-storage module? You need it to
be able to use most USB disk drives, card readers, cameras, etc.
(Note: You have to enable CONFIG_EXPERIMENTAL to be able to
select it.)

I don't see a config file, just zimage and lots of modules.
Can your kernel be used with scsi and usb?

It looks like it will do SCSI and USB, but I don't see the usb-storage
module.

I don't know of any 386 or 486 computers that do USB, so perhaps the posted kernel could be left as-is for 386, and another one compiled for P1 that will work with usb-storage (experimental).

David


I look forward to trying the new kernel(s) this weekend.




Archive powered by MHonArc 2.6.24.

Top of Page