Baslinux mailing list

["David Moberg" <davidjmoberg AT lycos.com>]

wvdial doesn't want to compile under uClibc for me. So, if 
you still want to use CHAP by default under BL3, you can 
use the manual method. 
 
At a command prompt: 
 
pppd /dev/ttyS2 57600 connect "chat ABORT BUSY ABORT 'NO CARRIER' '' ATZ OK 
ATD5551212 
CONNECT" defaultroute lock modem mtu 552 mru 552 crtscts -detach user 
myusername 
remotename x2 
 
Replace "/dev/ttyS2", "ATD5551212", "myusername", "57600", and "x2" with the 
proper 
settings. 
 
/etc/ppp/pap-secrets and /etc/ppp/chap-secrets must be set correctly. Here's 
what 
they look like on my PC: 
 
# Secrets for authentication using PAP/CHAP 
# client        server  secret                  IP addresses 
x2 myusername mypassword 
myusername x0 mypassword 
 
See the PPP-HOWTO for more information on this. 
 
David 

-- 
_______________________________________________
NEW! Lycos Dating Search. The only place to search multiple dating sites at 
once.
http://datingsearch.lycos.com