Skip to Content.
Sympa Menu

baslinux - [BL] cdrom

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: "Woonsig Hong" <wshong AT ediagsolutions.com>
  • To: <baslinux AT lists.ibiblio.org>
  • Subject: [BL] cdrom
  • Date: Fri, 19 Mar 2004 20:45:43 +0900

Hello.

Can I mount a cdrom in BL2.1(ram drive version) ?
I found following messages from dmesg.
----------------------------------------------------------------------------------
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: CRD-8322B, ATAPI CD/DVD-ROM drive <<<===============
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
FDC 0 is a post-1991 82077
Nand Flash disk driver, CompuLab
Samsung 64 MB Nand flash detected.
Partition check:
nanda: nanda1
NOR Flash (AMD) size: 2 MB total
loop: loaded (max 8 devices)
--------------------------------------------------------------------------------------
And mount command gave an error as follows.
~<#>mount -t vfat /dev/hda /mnt
mount: /dev/hda is not a valid block device
~<#>
Thanks in advance.

Regards,
Woonsig


Archive powered by MHonArc 2.6.24.

Top of Page