Skip to Content.
Sympa Menu

baslinux - Re: [BL] BL3 xvesa on a 386

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: James Miller <jamtat AT mailsnare.net>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] BL3 xvesa on a 386
  • Date: Fri, 6 Feb 2004 08:47:07 -0600 (CST)

On Fri, 6 Feb 2004 3aoo-cvfd AT dea.spamcon.org wrote:

> OK, boot Linux, turn on swap (use free to check that it
> is working) and then execute Xvesa.
>
,snip>
>
> Setup up networking before you start Xvesa. Ping to check
> you have a good connection. On one machine you do:
> ---------
> Xvesa -ac
> ---------

I need a clarification. I'm using startx (as noted in my earlier post)
as the command to fire up Xvesa. Here, you say to use Xvesa as the
command to start it. So, do both work? Am I maybe using the wrong
command to try and do this, and might my problems be caused by that?

James




Archive powered by MHonArc 2.6.24.

Top of Page