Skip to Content.
Sympa Menu

baslinux - Re: [BL] pdftotext

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: qwms-avib AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] pdftotext
  • Date: Sun, 15 Jun 2003 09:41:09 +0000

Neo Sze Wee wrote:
>
> Actaully my kernel is:
>-------------------------------------------------------------
> | Calibrating delay loop.. ok - 12.44 BogoMIPS

That looks like a 486-25

> | Memory: 3164k/4352k available

That looks like 4mb RAM, but 4352k is higher than usual.
I'm guessing that your laptop provides a bit more than
4mb RAM (with that amount of RAM, every little bit helps).

> | Linux version 2.0.0 (sag@DiD) (gcc version 2.7.2) #15
> Thu Jan 6 00:12:32 EST 2000

Wow, that's an old kernel. Even though it was compiled
in 2000, your kernel is from 1996 (the BL1 kernel is from
1998, and the BL2 kernel is from 2000).

> | tty00 at 0x03f8 (irq = 4) is a 16450
> | tty01 at 0x02f8 (irq = 3) is a 16450

Slow COM ports -- unsuitable for current external modems.

> | hda: Conner Peripherals 120MB - CP30104H

Small HD, but plenty of room for BL1.

> | hda: hda1 hda2 hda3 hda4

Four partitions. That's quite a lot for a 120mb HD.

> | Adding Swap: 2804k swap-space

That is too little swap -- your system will be stressed
and (perhaps) unstable. I strongly recommend you increase
swap to 8mb.

Cheers,
Steven






Archive powered by MHonArc 2.6.24.

Top of Page