Skip to Content.
Sympa Menu

baslinux - Re: [BL] Having trouble with networking

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: baslinux AT lists.ibiblio.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Having trouble with networking
  • Date: Sun, 23 Nov 2008 18:21:38 -0800

Hi,

Here's the output from ifconfig:
eth0 Link encap:Ethernet HWaddr 00:AA:00:59:03:25
inet addr:192.168.10.48 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:523 errors:0 dropped:0 overruns:0 frame:0
TX packets:564 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:42804 (41.8 KiB) TX bytes:42746 (41.7 KiB)
Interrupt:10 Base address:0x300

I was attempting to ping my router, whose ip address is 192.168.10.1.
The address that got assigned to eth0, as you can see above, is
192.168.10.48, which was assigned by DHCP. I find it slightly odd
that it was able to get DHCP information, but unable to do anything
afterwards.

Regards,
Jason




Archive powered by MHonArc 2.6.24.

Top of Page