Skip to Content.
Sympa Menu

sm-discuss - Re: [SM-Discuss] Updated ISO

sm-discuss AT lists.ibiblio.org

Subject: Public SourceMage Discussion List

List archive

Chronological Thread  
  • From: Adam Clark <adamsgl AT dhbit.ca>
  • To: The Well-Beloved Bard <dezmond AT bardicgrove.org>
  • Cc: johnc AT neto.com, sm-discuss AT lists.ibiblio.org
  • Subject: Re: [SM-Discuss] Updated ISO
  • Date: Thu, 16 Jan 2003 20:05:51 -0800

This isn't really an ISO issue... after a fresh install you should do these
steps (after the passwd change and other recommended things in the install
guide):

sorcery update
scribe update
sorcery rebuild

And then start building away.

On Thu, 16 Jan 2003 19:45:10 -0800 (PST)
The Well-Beloved Bard <dezmond AT bardicgrove.org> wrote:

> On Thu, 16 Jan 2003, Adam Clark wrote:
> > Hi there John,
> >
> > Well, it works for me when I test it, otherwise I don't release it. I
> > generally only take one test install path, though, so sometimes annoying
> > little bugs will pop up like the one I just corrected.
> >
> > However, I would say that the ISO is being testing "somewhat" as people
> > are downloading and using it as need be. It seems that I am getting the
> > appropriate complaints/bugs within a reasonable amount of time after
> > releasing an ISO, too.
> >
> > So, I would say that "for most people", the ISO is okay. There are some
> > people who are asking for things like grub, pcmcia support, etc., and
> > those features will probably be worked into the ISO in the near future.
> >
> > <snip>
>
> Haven't had a chance to try the ISO posted on the 15th yet (pulled it down
>
> today, burn & install tomorrow), but I've run into a problem with the
> previous ISO (posted the 8th? I can't remember).
>
> Once I've installed and reboot, I took the following steps:
> 1) set root password
> 2) set http_proxy and ftp_proxy (I'm trying to bring up my new dev box at
> work - behind a firewall)
> 3) run sorcery to select system optimizations, set email addy, and set
> prompt delay
> 4) scribe remove test
> 5) scribe add devel
> 6) sorcery update
> 7) cast xfree86 vlock NVIDIA_GLX NVIDIA_kernel mozilla Eterm
>
> I get back an error on xfree86 & vlock (haven't had time to check the
> others yet) that there isn't an MD5 sum, so the spell is aborting. With
> vlock, I checked and the DETAILS file didn't have an MD5[*] entry, so I
> ran the md5sum and updated the DETAILS file -- worked fine. With xfree86,
>
> things aren't so simple. The spell is aborting with a complaint that
> there is not an MD5sum for the first tgz (X420-1-src.tgz, I think...), so
> I checked the DETAILS file for xfree86, and found that not only was the
> MD5sum there, but it matched the md5sum I ran on the ungzipped file.
>
> Anyone have any thoughts/comments/seen this before? As noted, I'm going
> to be trying with the 15-jan-2003 ISO tomorrow, but thought I'd bring this
>
> up. I'd run on the test tree, but it's lagging behind development on a
> couple of key apps (mozilla being the one I care most about right now...).
>
>
> Related question to this last - does cast support multiple grimoires yet?
> (i.e., if I didn't scribe remove test, but did a scribe add devel, would I
>
> be able to cast devel mozilla, and cast xfree86 (from the test grimoire)?)
>
> Thanks,
> steve
> --
> I remain, as always,
> In service to His dream.
> --The Well-Beloved Bard--
> --dez AT bardicgrove.org--
>
> _______________________________________________
> SM-Discuss mailing list
> SM-Discuss AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/sm-discuss


--
Adam Clark, Chat Section Maintainer, ISO Forger
Grimoire Gurus Cardholding Member
a.k.a. Kinetix on #sourcemage, #grimoire-gurus
Come see http://dhbit.ca for all your tech humour needs!

Attachment: pgphx7DVmyWN3.pgp
Description: PGP signature




Archive powered by MHonArc 2.6.24.

Top of Page