FreeTDS Development Group

[Mark Schaal <mark AT champ.tstonramp.com>]

Status report:
(1) The same error occurs with freetds 0.50.
(2) The error occurs in TDS5.0 mode but not TDS4.2 mode.
(3) The error is reported by the server 
(4) The error occurs at the end of the first query, not the
    beginning of the second query.

I think that #3 indicates a server-side problem.  Is jdbc.sybase.com
a real database or some type of gateway?  However, #4 indicates there
is a client-side problem either in sqsh or freetds b/c the error is not
getting reported where it should be.  I'll look into that further.

Mark

> > 0.51 has problems with Sybase test site
> > Tested with sqsh 1.7
> > 
> > interface file:
> > JDBC
> >         query tcp tds5.0 192.138.151.39 4444
> >         master tcp tds5.0 192.138.151.39 4444
> > 
> > 
> > Test:
> > 
> > ./sqsh -SJDBC -Uguest -Psybase
> > 
> > [22] JDBC..1> sp_helpdb
> > [22] JDBC..2> go
> > 
> > The first time is ok, but if I reissue the command I got:
> > Msg 3805, Level 18, State 1 
> > Server 'JDBC', Line 1
> > The token datastream length was not correct. This is an internal  
> > protocol error.
> > 
> > Could somebody test this connection on some other platform so I can  
> > see if it's platform dependant.
> > 
> > Thanks.
> > 
> > Fabien.


-- 
Mark J. Schaal                                  Phone:      (909) 620-7724
TST On Ramp                                     Fax:        (909) 620-8174
System Administrator                            E-Mail: mark AT tstonramp.com