baslinux AT lists.ibiblio.org
Subject: Baslinux mailing list
List archive
- From: baslinux AT lists.ibiblio.org
- To: baslinux AT lists.ibiblio.org
- Subject: Re: [BL] DE-220PCT
- Date: Tue, 13 Jan 2009 19:46:05 -0500
On 01/13/2009 06:59 PM, baslinux AT lists.ibiblio.org wrote:
On Tue, 13 Jan 2009, baslinux AT lists.ibiblio.org wrote:Thanks for the help.
So I got a DE-220PCT for the computer (486, 8MB RAM) that I intend on
using BasicLinux with (dualboot with DOS 6.22). It's a 16-bit ISA
ethernet/coaxial adapter. I'm just wondering if anyone has had any
experience with it and whether or not they know if it works or does not
work in BL3.
-Zach
See http://www.scrounge.org/linux/nics.htm
This is a pnp ISA modem.
They say to run install.exe in DOS to disable the PNP mode first.
That program might give you irq and io. I had a 3com like that where I
could use DOS to choose irq and io, then use without pnp. pnp in linux is
a major nuisance.
insmod ne irq=10 io=0x300 (or whatever the numbers are)
Do you have PCI slots?Unfortunately not. I figured this out the hard way, after buying a PCI
ethernet card. (DFE-530TX+)
Sindi
-----------------------
BasicLinux mailing list
-----------------------
http://www.basiclinux.com.ru
http://www.ibiblio.org/pub/linux/distributions/baslinux/
------------------------------------
To exit, send subject=unsubscribe to
baslinux-request AT lists.ibiblio.org
-
[BL] DE-220PCT,
baslinux, 01/13/2009
-
Re: [BL] DE-220PCT,
baslinux, 01/13/2009
- Re: [BL] DE-220PCT, baslinux, 01/13/2009
-
Re: [BL] DE-220PCT,
baslinux, 01/17/2009
-
Re: [BL] DE-220PCT,
baslinux, 01/18/2009
- Re: [BL] DE-220PCT, baslinux, 01/18/2009
-
Re: [BL] DE-220PCT,
baslinux, 01/18/2009
-
Re: [BL] DE-220PCT,
baslinux, 01/13/2009
Archive powered by MHonArc 2.6.24.