Skip to Content.
Sympa Menu

baslinux - [BL] microcom and BBS

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: David Moberg <davidjmoberg AT gmail.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: [BL] microcom and BBS
  • Date: Fri, 13 Jan 2006 19:47:07 -0800

If you press ~ in microcom and then t, you will see this screen:

******Set terminal ******
p - set speed choose speed for the serial COM port
m - no CR/NL mapping enable/disable CR/NL mapping for terminal
n - no flow control
h - hardware flow control hardware flow control is preferred for modem
s - software flow control
q - quit help
*************************

Perhaps the m option will fix the Enter problem?

David




Archive powered by MHonArc 2.6.24.

Top of Page