baslinux AT lists.ibiblio.org
Subject: Baslinux mailing list
List archive
- From: "Anthony Albert" <albert AT umpi.maine.edu>
- To: baslinux AT lists.ibiblio.org
- Subject: Re: [BL] postscript network printers
- Date: Fri, 09 Dec 2005 08:39:55 -0500
On 9 Dec 2005 at 2:19, sindi keesan wrote:
>On Thu, 8 Dec 2005, Anthony Albert wrote:
>> On 8 Dec 2005 at 17:04, sindi keesan wrote:
>>> On Thu, 8 Dec 2005, Anthony Albert wrote:
>>>> On 7 Dec 2005 at 22:35, sindi keesan wrote:
>>>>> QMS finally called back while I was here and explained that the flash
>>>>> rom
>>>>> (eeprom?) on the 'controller' (motherboard) is bad ('image checksum
>>>>> error') and no, we can't solder in a new one with a soldering iron, but
>>>>> I
>>>>> can buy a replacement controller. They named two wholesalers.
>>>>
>>>> Ahhhh... this explains much. Though, I would bet that you could
>>>> replace it with a sufficiently skilled touch. However, you'd probably
>>>> need to find another printer of the same model first, from which you
>>>> could download the contents of the flash, to program the new one before
>>>> soldering it into place.
>>>
>>> They implied that it could not be soldered by hand. But my partner fixed
>>> three dead motherboards by replacing capacitors and two of them still
>>> work. I thought the rom (is this the CMOS?) is usually socketed.
>>
>> It might be socketed (EPROM & EEPROM often are), but if it's plain ROM
>> or flash, then most likely, it's surface-mount soldered, which can be
>
>They said it was flash rom. The only two things on the board which don't
>appear to be surface soldered are the lithium battery and a VALOR FL1012
>which has something to do with ethernet.
>
>What would the flash ROM look like? These other chips look connected by
>metallic spiderweb.
[SNIP]
Pretty much like any other plastic chip package, unfortunately. I'd
suggest that it's more likely to be one of the larger packages. You
may need to start checking part numbers against Google, if you're
serious about replacing it.
Anthony Albert
===========================================================
Anthony J. Albert albert AT umpi.maine.edu
Systems and Software Support Specialist Postmaster
Computer Services - University of Maine, Presque Isle
"This is only temporary, unless it works."
--- Red Green
-
Re: [BL] postscript network printers
, (continued)
-
Re: [BL] postscript network printers,
Anthony Albert, 12/02/2005
-
Re: [BL] postscript network printers,
sindi keesan, 12/02/2005
-
Re: [BL] postscript network printers,
Anthony Albert, 12/06/2005
-
Re: [BL] postscript network printers,
sindi keesan, 12/06/2005
- Re: [BL] postscript network printers, Anthony Albert, 12/07/2005
- Re: [BL] postscript network printers, sindi keesan, 12/07/2005
- Re: [BL] postscript network printers, Anthony Albert, 12/08/2005
- Re: [BL] postscript network printers, sindi keesan, 12/08/2005
- Re: [BL] postscript network printers, Anthony Albert, 12/08/2005
- Re: [BL] postscript network printers, sindi keesan, 12/08/2005
- Re: [BL] postscript network printers, Anthony Albert, 12/09/2005
- Re: [BL] postscript network printers, sindi keesan, 12/09/2005
- Re: [BL] postscript network printers, Anthony Albert, 12/09/2005
- Re: [BL] postscript network printers, sindi keesan, 12/12/2005
- Re: [BL] postscript network printers, sindi keesan, 12/12/2005
- Re: [BL] postscript network printers, David Moberg, 12/12/2005
- Re: [BL] postscript network printers, sindi keesan, 12/12/2005
- Re: [BL] postscript network printers, sindi keesan, 12/12/2005
-
Re: [BL] postscript network printers,
sindi keesan, 12/06/2005
-
Re: [BL] postscript network printers,
Anthony Albert, 12/06/2005
- Re: [BL] postscript network printers, 3aoo-cvfd, 12/12/2005
- Re: [BL] postscript network printers, sindi keesan, 12/12/2005
- Re: [BL] postscript network printers, David Moberg, 12/12/2005
-
Re: [BL] postscript network printers,
sindi keesan, 12/02/2005
-
Re: [BL] postscript network printers,
Anthony Albert, 12/02/2005
Archive powered by MHonArc 2.6.24.