Skip to Content.
Sympa Menu

baslinux - Re: [BL] no XVESA or svgalib - DOS/linux video problem

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Ron Clarke <ron AT ausreg.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] no XVESA or svgalib - DOS/linux video problem
  • Date: Sun, 10 Jul 2005 09:31:38 +1000

Hi Sindi,

On Sat, 9 Jul 2005 15:41:39 +0000 (UTC)
sindi keesan <keesan AT sdf.lonestar.org> wrote:

> I have an S3 Trio3D AGP video card (4MB RAM, VESA 2.0) which worked fine
> in another computer. This computer has PCI ethernet and scsi cards, ISA
> modem and ISA/pnp sound (Awe64) and a jumpered ISA I/O card to replace the
> bad floppy controller and bad primary IDE controller (the master part was
> okay, the slave intermittent). It is 533MHz and sometimes freezes up when
> I try to go into CMOS setup.
<snipped>
>
> Compushow gives a runtime error 200

This last is because Compushow has that Pascal bug that cannot cope with
a faster computer.
Compushow does not run on my Duron 600 but is still OK on me AMD K3 450.

Regards,
Ron

--
Ron Clarke
AUSREG Consultancy http://www.ausreg.com
Tadpole Tunes http://tadpole.mytunebook.de/
This mail sent to you from sylpheed running on penguin-power




Archive powered by MHonArc 2.6.24.

Top of Page