Skip to Content.
Sympa Menu

baslinux - Re: [BL] How do you set eth0 for a block of IPs?

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: 3aoo-cvfd AT dea.spamcon.org
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] How do you set eth0 for a block of IPs?
  • Date: Wed, 2 Mar 2005 07:44:23 +1300

Carl Reaburn wrote:
>
> I have ipchains installed along with the correct bare.i kernel.
>
> I want to use the BL3 machine to accept ip's 200.0.0.203-206
> on eth0, and pass some packets to eth1 if they pass the
> ipchains testing.

http://www.linuxplanet.com/linuxplanet/tutorials/1241/1/
http://yolinux.com/TUTORIALS/LinuxTutorialIptablesNetworkGateway.htm
http://www.tldp.org/HOWTO/IPCHAINS-HOWTO.html

Or, for generic questions like this, you can subscribe
to the linux-newbie list. It's a low traffic list that
has some very knowledgeable people who try to be helpful
(although some of them don't suffer fools gladly).
-------------------------
majordomo AT vger.kernel.org
subscribe linux-newbie
-------------------------

Cheers,
Steven




Archive powered by MHonArc 2.6.24.

Top of Page