Skip to Content.
Sympa Menu

baslinux - Re: [BL] Getting ISA NIC working

baslinux AT lists.ibiblio.org

Subject: Baslinux mailing list

List archive

Chronological Thread  
  • From: Termina <termina AT gmail.com>
  • To: baslinux AT lists.ibiblio.org
  • Subject: Re: [BL] Getting ISA NIC working
  • Date: Wed, 16 Feb 2005 13:07:44 -0600

insmod ne io=0x300 worked

You kick ass ^_^

Thanks!


On Thu, 17 Feb 2005 06:36:44 +1300, 3aoo-cvfd AT dea.spamcon.org
<3aoo-cvfd AT dea.spamcon.org> wrote:
> Anthony Albert wrote:
> >
> >it's suggested that it is an NE2000 compatible, so
> > you'll want to try the NE2000 driver module.
>
> NE2000 requires the 8390 helper module.
> What happens when you do the following?
> -----------
> insmod 8390
> -----------
> That should go in without error. If so, proceed
> to the next step.
>
> As it says in /root/netsetup, NE2000 ISA cards need
> to be given the exact IO address. For example:
> ------------------
> insmod ne io=0x320
> ------------------
> However, that will only work if the card is actually
> at that address (usually set by jumpers on the card).
> If the address is wrong the insmod will fail.
>
> The most common addresses for NE200 cards are:
> 0x280, 0x300, 0x320, 0x340, 0x360.
> I suggest you try them all (one by one).
>
> Cheers,
> Steven
>
> ____________________________
> http://www.basiclinux.com.ru
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux
>


--
-Bill Twomey
----------------------------
Join us in IRC!
irc.UnhandledExceptions.com
#unhandledexceptions
----------------------------




Archive powered by MHonArc 2.6.24.

Top of Page