Baslinux mailing list

[sindi keesan <keesan AT sdf.lonestar.org>]

On Mon, 10 Jan 2005, Alejandro Lieber wrote:

> Steven:
>
> I included:
>
> --------------------------
> insmod parport_pc io=0x3bc
> --------------------------
>
> Now baslinux prints through lp0

Did you also type
insmod parport_pc
as well as the above line?

And does lp1 still work too?

If your lp0 is on a Hercules card look and see if you can change a jumper 
so that the card will have a different address and you won't need to 
specify 0x3bc.


> Thank you very much.
>
>
> On 10 Jan 05 at 16:56, 3aoo-cvfd AT dea.spamcon.org wrote:
>
>
> > Alejandro Lieber wrote:
> > > > insmod parport
> > > > insmod parport_pc
> > > > insmod lp
> > >
> > > It works with lp1.
> > > But I want to use lp0, the same output I use in DOS.
> > > What do I change to use lp0 instead of lp1 ?
> >
> > I suggest you specify the port address:
> > --------------------------
> > insmod parport_pc io=0x378  ## or io=0x278
> > --------------------------
> >
> > Cheers,
> > Steven
>
>
> Read net news (USENET) with Arachne: http://www.lieber.com.ar/nnews.zip
> Sans Serif fonts for MS-DOS at: http://www.lieber.com.ar/novafont.zip
> Configurable dialing menu for several DOS internet programs at:
> http://www.lieber.com.ar/dial_ip.zip
>
> ---------------------
> Ing. Alejandro Lieber
> Rosario     Argentina
> ---------------------
>
> _______________________________________________
> BasLinux mailing list
> BasLinux AT lists.ibiblio.org
> http://lists.ibiblio.org/mailman/listinfo/baslinux

keesan AT sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org